Basalt fiber rebar production line – model 1by2 we produced for a Mongolian customer and it has been delivered to the customer at the end of August.
- This model of equipment is used to manufacture 2 rebar at a time, the appearance of the basalt fiber rebar is threaded by polyester fiber and coated with silica sand, which can enhance the friction between the basalt rebar and the reinforced materials. The appearance can refer to the following picture:
It is a typical rebar appearance. KINDLY REMINDER: if you want other appearance, for example, no thread, or no silica sand, our other machine model can meet your requirements.
-
This equipment can produce basalt fiber rebar at a rate of 2.5 meters per minute, and no water cooling device, do not reduce the strength of the basalt rebar. So, the production capacity per day can up to 7200m.
KINDLY REMINDER: if you need high speed production, out other model machinery can meet your requirements.
- The diameter range this model machine can produced is from 4mm to 24mm.
KINDLY REMINDER: we have 1by1 model, which can produce rebar maximum 50mm, and we have 1by4 model, which can produce rebar from 4mm to 12mm.
-
We equipped with two types of device for our Mongolian customer that used to pack the finished basalt rebar. One is the roller device with 2m diameter, which can load maximum 3000m long rebar and the customer can cut into any length rebar. Another is the automatic cutting device, which can cut maximum 6m long rebar at a time.
-
This machine, we set up a dual operation platform and integrated control panel, no matter where the operator is, he can easily and quickly control the machine.
Except for the machine manufacturing, we also provide comprehensive services for you, such as Production technology, Supply raw materials, installation and start-up and maintenance work, Training, Warranty and after-sales service and so on.
Welcome to visit us and Consult us, we are sure any of your comments will get our prompt response.
Post time: Nov-17-2021